PRESSURE SAFETY VALVES

PRESSURE SAFETY VALVES

PRESSURE SAFETY VALVES

PRESSURE SAFETY VALVES

PRESSURE SAFETY VALVES
PRESSURE SAFETY VALVES

PRESSURE SAFETY VALVES

View: 288 - Date Submitted: 19/12/2019

The primary purpose of a safety valve is the protection of life, property and environment. A safety valve is designed to open and relieve excess pressure from vessels or equipment and to reclose and prevent the further release of fluid after normal conditions have been restored.

Content

Features

  • Manufacturing Standerd : Api – 526
  • Tested As Per : Api 527
  • Ends Flanged (Drilled & Undrilled) As Per Ansi B 16.5 Class – 150 R.F.
  • Body Hydrostatic Test Pressure Twice The Set Pressure
  • Set Pressure 1 Kg/Cm2 To 21 Kg/Cm2
  • Temperature – 425oc
  • Ibr Approved With Discharge Capacity Constant Of ‘24’
  • Accurate Spring Designs To Achieve Blow Down Within 5% Which Saves Wastage Of Steam.
  • Soft Seated Safety Relief Valves Are Used For Low Temprature And Critical Application

 

While Enquiry Please Specify

Set Pressure

Flow Medium

Flow Rate

Other product

Level transmitters provide continuous level measurement over the range of the system rather than at a single point and produce an output signal that directly correlates to the level within a vessel. From depth and pressure, to float, radar, ultrasonic,...
A temperature gauge is a device used to indicate the temperature of an item being monitored. The display can be an analogue dial, an analogue range or a digital readout. Common methods of measuring temperature include bimetallic strip (the bending of...
A level gauge is a device used to display liquid levels in applications. Depending on the type of application to be used, select the appropriate level gauge. The level gauge is a direct method for level measurement.
A pressure transmitter is a mechanical device that measures the expansive force of a liquid or gaseous sample. Also known as a pressure transducer, this type of sensor is typically composed of a pressure sensitive surface area made of steel, silicon,...
A comprehensive range of small forged gate, globe, check, angle and bellows seal valves with unique design features. Pressure gauges are instruments designed to measure the pressure of media in a system
Limit switch box designed for safe and hazardous areas, provides a visual and electrical remote position feedback on automated valves.
Solenoid valves are control units which, when electrically energized or de-energized, either shut off or allow fluid flow. The actuator takes the form of an electromagnet. When energized, a magnetic field builds up which pulls a plunger or pivoted armature...
Temperature transmitter is an electrical instrument, which interfaces the temperature sensor to isolate, amplify, filter noise and convert the signal from the sensor to send it to the control device. It is a tool to help measure and alert temperature...
Gọi điện
Sms
Zalo
Facebook