Industrial Valve Company
Industrial Valve Company
Industrial Valve Company
Industrial Valve Company
Industrial Valve Company
Industrial Valve Company
INSTRUMENT VALVES
Valves are used in applications wherever instrument measurement occurs. Valves are used for isolation, venting, block & bleed, static pressure, absolute pressure, gauge pressure, differential pressure, liquid level & instrument lines. Valve end connections are female NPT & male NPT.
These valves feature a Micro-Finished Floating Ball design to provide a positive seal in both directions. Series IBV Instrument Ball Valves also feature a “straight-through” flow path to ensure high flows with minimum pressure drop. The valves are...
Instrument Check Valves are used to make sure that medium flows only in one direction . Check Valves provide unidirectional flow and tight shut-off for liquids and gas with high reliability. When differential drops below cracking pressure, valve shuts...
A needle valve is used to accurately control flow rates of clean gasses or fluids. The adjustments are gradual and smooth for controlling the flow rate, however, they can also be used as a reliable shut-off valve.
Through the non-rotating spindle tip of the block-and-bleed valve, the wear of the sealing elements is reduced. This results, particularly with frequent opening and closing, in a noticeable increase in the service life.
A manifold is a device that connects one or more block/isolate valves of a hydraulic system. Valves of a hydraulic system can include a ball, needle, bleed and vent valves.