Globe Valves

View: 385 - Date Submitted: 24/12/2019

Globe Valves are used within several types of machinery and industries such as steam, service, and processing pipelines. Globe valves are widely used for single-streamed flow control and work efficiently for regulating facilities.

+84 28 3512 0138 (Hotline) Contact

Content

Product Description

Category: Globe valve

Design	API 602 ; BS1873
End Connection	Flanged, Thread, Welded
Operation	Manual/Pneumatic/Electric
Size Range	NPS 1/2"-24"(DN15-DN600)
Pressure Rating	ASME Class 150~2500(PN16~PN420)
Body Material	Carbon steel, Stainless steel, Alloy steel, Duplex stainless steel

Globe valves are generally characterized for their spherical body with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which the disc, connected to a stem, can be screwed in (if operated manually) or slid in (if automated) to close the valve.
A complete range of globe valves, ideal for throttling and shut-off services for oil & gas, petrochemical, power, offshore, and other demanding applications. Designed for duties where high flow efficiency, tight shut-off, and the long service life are a prime requirement. A wide choice of shell and trim materials do cover the whole range of applications, from the everyday type of non-corrosive service to critical service with highly aggressive media.
• ASME 16.34, API 602
• Full bore
• Pressure Class 150 ~ 2500
• NPS ½” ~ 16”
• RF, RTJ, BW, NPT, & SW Ends
• Bolted Bonnet, Pressure Sealed Bonnet, Welded Bonnet
• Plug Disc, Adjustable Disc, Double Disc
• Back Seat Design
• Outside Screw and Yoke (OS& Y)
• Renewable Seat, Welded Seat, Integral Seat
• Testing according to API 598
• Trim standard: no. 1 main sealing 13% Cr / 13% Cr.
• Other trim
• Drain tappings
• By-pass
• Open and shut indicator
• Electric actuator operation

Other product

Top Entry Ball Valve

Top entry ball valves are valves that assembled its ball from top side part. It just like a globe valve that has body and bonnet except the trim part utilize a ball type. It comprises a one single body. Usually top entry ball valves are made from casting...

Butterfly Valves

The valve body shall be one-piece wafer or lug design with extended neck and a concentric disc and seat configuration to allow for 2"- 48” of piping insulation, have flange hole drilling per international flange standards and be provided with a non-corrosive...

Block & Bleed Valves

A Block and bleed manifold is a hydraulic manifold that combines one or more block/isolate valves, usually ball valves, and one or more bleed/vent valves, usually ball or needle valves, into one component for interface with other components (pressure...

Gate Valve

API 600 Cast Steel Pressure Seal Gate Valve. Gate valves work by inserting a rectangular gate or wedge into the path of a flowing fluid. They are operated by a threaded stem which connects the actuator (generally a hand wheel or motor) to the stem of...

Check Valve

Check valves are found in almost every industrial application acting as one-way or non-return valves. Check valves are simple devices, perform a vital function by preventing reverse flows, therefore preventing damage and ensuring efficient operations....

Side Entry Ball Valve

Side entry ball valves are valves that assembled its ball from the side part. It usually assembled in two pieces or three pieces body. Each part of the body is assembled by a bolt/stud just like joining a two piece of flanges. Usually side entry ball...