ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
ELECTRIC ACTUATED VALVES
View: 411 - Date Submitted: 31/12/2019
Electric actuators can generate this force by transmitting it to the output shaft and then the valve stem. When pressure is applied to the valve stem, the valve’s orifice opens or closes.
Content
The feature-rich S3 Series multi-voltage actuator takes its highly successful predecessor, the S2, to the next level. IVC now offers the third generation of electric actuators to complement our lines of thermoplastic valves that incorporates four torque-range models in both the “L” ( Low Voltage) and “E” (High Voltage) series.
- S3 Model Max. Operating Torque
- Model 20 177 in./Lbs
- Model 35 309 in./Lbs
- Model 55 486 in./Lbs
- Model 85 752 in./Lbs
The S3 offers a long list of user-friendly standard features that are often options on other manufacturer’s equipment, including:
- Multi-voltage capability with automatic voltage sensing
- Electronic torque limiter
- Automatic Temperature Control (anti-condensation heater)
- A highly visible LED status light and dome position Indicator
- All new, rugged weatherproof and anti-corrosive polyamide housing
- Local and remote position confirmation
- Manual override with safety cut-out switch
- Protected electrical supply with same wiring connections for AC & DC power
Other product
Pneumatic actuated valves used compressed air flowing into and exhausting from an actuator to open and close the valve. The type of pneumatic actuator required depends on the actuator valve. Valves requiring linear motion (gate, globe or diaphragm valves)...
Hydraulic actuators use liquid pressure rather than instrument air pressure to apply force on the diaphragm to move the valve actuator and then to position valve stem. ... If the passage of oil to and from a hydraulic cylinder is blocked by small valves,...