- Available in high grade stainless steel, bass materials
- Variety of end connections includes Male/Female threaded NPT, BSP, BSPT, ISO, DIN and JIS tapered pipe ends
- “O” ring poppet design for replaceable high integrity seal.
- Tight shut-off and accurate cracking pressure.
- Suitable for gas and liquids.
- 100% factory tested for both crack & reseal
- Complete heat traceability
- Pressure / Temperature Ratings
- Orifice Size : 0.138" (3.5mm) to 0.250" (6.4mm)
Check valves
Check valves
Check valves
Check valves
Check valves
Check valves
Check valves
View: 555 - Date Submitted: 25/08/2021
Instrument Check Valves are used to make sure that medium flows only in one direction . Check Valves provide unidirectional flow and tight shut-off for liquids and gas with high reliability. When differential drops below cracking pressure, valve shuts off. Ball Check Valve prevents reverse flow where leak-tight shut-off is not mandatory. When differential drops below cracking pressure, valve closes.
Content
Features
Other product
These valves feature a Micro-Finished Floating Ball design to provide a positive seal in both directions. Series IBV Instrument Ball Valves also feature a “straight-through” flow path to ensure high flows with minimum pressure drop. The valves are...
A needle valve is used to accurately control flow rates of clean gasses or fluids. The adjustments are gradual and smooth for controlling the flow rate, however, they can also be used as a reliable shut-off valve.
Through the non-rotating spindle tip of the block-and-bleed valve, the wear of the sealing elements is reduced. This results, particularly with frequent opening and closing, in a noticeable increase in the service life.
A manifold is a device that connects one or more block/isolate valves of a hydraulic system. Valves of a hydraulic system can include a ball, needle, bleed and vent valves.